BOSCH
|
|
|||||||||||||||||
This is my pride and joy. Impossible to find but with a lot of patience and eBay, I scored! The Uni-Tester is a break-out box used for engine parameter testing. The Motronic cable (not shown) connects to a 63 pin circular connector in the top of the Uni-Tester. The cable has two 35 pin connectors that allows the Uni-Tester to be inserted between the DME and the cars harness. All engine signals are now accessible to various test equipment. The Uni-Tester is used with an oscilloscope, volt meter, and ohm meter. |
||||||||||||||||||
|
